svc236 no.6800-1/6 features ? low voltage (6.5v) ? twin type varactor diode with good large-signal characteristics for fm receiver electronic tuning use ? very small package permits svc236-applied sets to be compact and slim ? can be also provieded in tape reel package and automatic insertion is supported ? high capacitance ratio (v r =1.0 to 6.5v) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit reverse voltage v r 16 v junction temperature tj 125 c storage temperature tstg --55 to +125 c package dimensions unit : mm (typ) 7013a-006 ordering number : EN6800A 72512 tkim/31901 giim ta-3095 sanyo semiconductors data sheet svc236 diffused junction type silicon diode varactor diode for fm receiver electronic tuning use http:// semicon.sanyo.com/en/network product & package information ? package : cp ? jeita, jedec : sc-59, to-236, sot-23, to-236ab ? minimum packing quantity : 3,000 pcs./reel packing type: tb marking electrical connection 1 : anode 2 : anode 3 : cathode sanyo : cp 12 3 1.5 2.5 1.1 0.3 0.05 2.9 0.95 0.4 0.1 0.5 0.5 tb svc236-tb-e zv lot no. lot no. 1 3 2
svc236 no.6800-2/6 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max breakdown voltage v (br)r i r =10 a16v reverse current i r v r =10v 50 na interterminal capacitance * c1v v r =1.0v, f=1mhz 92.07 102.12 pf c3.0v v r =3.0v, f=1mhz 35.14 41.98 pf c6.5v v r =6.5v, f=1mhz 14.44 16.84 pf quality factor qv r =3.0v, f=100mhz 70 capacitance ratio c r c1.0v / c6.5v 5.0 matching tolerance c m v r =1.0v, 3.0, 6.5, f=1mhz, (cmax cmin) / cmin 100 3.0 % note) * : capacitance value per each diode. : 1mhz signal : 20mvnms ordering information device package shipping memo svc236-tb-e cp 3,000pcs./reel pb free c, q -- v r 012345678910 10 2 3 5 7 100 2 3 5 7 1000 10 2 3 5 7 100 2 3 5 7 1000 it02779 v rf =20mvrms interterminal capacitance, c -- pf qualit y factor, q reverse voltage, v r -- v quality factor q (f=100mhz) interterminal capacitance c (f=1mhz)
svc236 no.6800-3/6 c -- ta 1.10 1.08 1.06 1.04 1.02 1.00 0.98 0.94 0.96 --75 --50 --25 0 25 50 75 100 125 150 175 it02800 5.0v 6.5v v r =1.0v 3.0v capacitance ratio(%) ambient temperature, ta -- c f=1mhz v rf =20mvrms
svc236 no.6800-4/6 taping speci cation svc236-tb-e
svc236 no.6800-5/6 outline drawing land pattern example svc236-tb-e mass (g) unit 0.013 * for reference mm unit: mm 0.95 0.95 1.0 2.4 0.8
svc236 no.6800-6/6 ps this catalog provides information as of july, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
